On completion of this course the learner will have in-depth knowledge and understanding of the OHS Act (procedures and regulations).

The course will enable learners to understand the importance of compliance to safety, health and environmental legal and other requirements for a specific workplace and the importance of integrating safety, health and environmental considerations into all routine activities at the workplace. In addition learners will be able to identify any deviations and workplace safety performance in the workplace from health, safety and environmental requirements and be able to ensure that the correct action is taken in situations where safety health and environmental issues are not in accordance with requirements.

This course will take the learners through a detailed and proven procedure for effective internal audits. Whilst the course is directed towards the NOSA HSE Management System, the principles can be applied to audit any HSE system/process.

Upon completion of this course, the learner will have an in-depth knowledge and understanding of the basic legal requirements in term of injuries and diseases.

Upon completion of the course, the successful learner should have the knowledge and skills (competence) to assess an organisation’s conformance against the requirements of ISO 45001: 2018 and ISO 14001: 2015, utilising the international guidelines for auditing management systems (ISO 19011: 2018).

Upon completion of the course, the successful learner will have a sound understanding of environmental management systems and a methodology for their implementation. The learner will also be equipped to implement the principal requirements of OHSAS 18001, the internationally recognised Occupation Health and Safety Assessment Series (OHSAS).

Upon completion of the course, the successful learner will be able to perform effective internal audits of an environmental management system to ISO 14001. The learner will also be able to conduct an internal audit in accordance with OHSAS 18001.

On completion of the course, the successful learner will be able to explain and apply safety, health and environmental requirements in the workplace and principal requirements of OHSAS 18001.

Upon completion of the course, the successful learner will have a sound understanding of environmental management systems (EMS) and a methodology for their implementation. The learner will also be equipped to implement the principal requirements of ISO 45001: 2018. The learner will understand how management systems can assist their organisation in reaching its strategic goals and mitigate the risks associated with ineffective management of safety, health and environment (HSE) related issues. ISO 45001: 2018 will assist their organisation in keeping its workers healthy and safe. ISO 14001: 2015 will help ensure that the impact of their organisation’s activities on the environment is effectively managed.

On completion of the course, the successful learner will be able to explain and apply health, safety and environmental requirements in the workplace and principal requirements of ISO 45001: 2018.

The course offers the learner the opportunity to gain an understanding of the Construction Regulations wherein, they will be able to apply legal referencing, understand the importance of compliance and be familiar with the processes and procedures regarding professional registration.

Learners that successfully complete this course will be able to handle and store dangerous goods. They will be able to classify goods in preparation for storage and prepare these goods for safe transportation. Learners will also be able to handle incidents in the event of them happening in accordance with required safety procedures and guidelines.

Dangerous Goods Training as gazetted to ensure compliance of Chapter 8 of the Road Traffic Act 1996, is necessary for any driver wanting to transport dangerous goods on South African roads. The purpose of learning is to ensure safe loading, conveying and off-loading of dangerous goods, according to legal and organisational requirements. Drivers will be skilled in conveying dangerous goods in accordance with legal, safety, manufacturer and other relevant requirements, and to handle incidents safely when they occur. Any driver wishing to apply for a professional driving permit PrDP (D) or renew their PrDP (D) needs to receive a certificate of competence against this unit standard.

Equip your HSE professionals with NOSA’s COVID-19 workplace safety implementation training It is vital that you and your employees responsible for managing safety in your workplace, understand how to implement HSE systems in your organisation in alignment with COVID-19 workplace safety guidelines. We invite you to participate in our one-day webinar programme, created especially for you and those employees who will drive implementation of the new COVID-19 safety processes at your workplace. The training will cover OHS Act sections 8, 9, 13 and 14; RHBA; COIDA; NEM: WA, as well as COVID-19 guidelines developed by NOSA. Employees will receive an attendance certificate that confirms their understanding of the training provided.

Prepare all returning employees with NOSA’s COVID-19 Employee Workplace Induction webinar It is vital that you and your employees understand how to resume operations in your business in alignment with COVID-19 workplace safety guidelines. We invite you to join us for a two-hour webinar workshop, which we will curate according to your specific workplace procedures. This will be done in the form of a company specific questionnaire. The information provided will equip us with a baseline of the current procedures you have in place, and how to tailor your individual induction programme.

The course is aimed at those individuals who will be responsible for the safety and protection of people working at heights where there is a risk of injury from a fall. The course will equip learners with the necessary knowledge, skills and understanding to develop fall protection plans for people working at height, required by the Occupational Health and safety act (Act 85 of 1993).

Upon completion of the course, the successful learner will be able to assume responsibility for the safety and protection of people working at height, where there is a risk of injury from a fall.

The course provides learners an overview of the key requirements of the OHS Act, pertaining to safe use of plant and machinery, and how to implement and manage these.

This practical course will provide learners with the necessary tools and skills to enable them to carry out hazard identification and risk assessments in the workplace. The aim of the course is to enable responsible and informed contributions to the health and safety effort in the workplace.

This course is for learners who have to demonstrate the ability to conduct a risk assessment in the workplace

Upon completion of the course, the successful learner will understand how to adopt a detailed but simple approach to incident investigation procedures and techniques.

As a stepping stone towards obtaining your SAMTRAC certificate, Introduction to SAMTRAC will provide learners with the ability to understand the fundamentals of HSE-related legislation and legal compliance as well as the ability to apply the techniques for hazard identification and risk assessment.

Upon completion of the course, the successful learner will have a sound understanding of environmental management systems and a methodology for implementation.

Upon completion of the course, the successful learner will be able to perform effective internal audits of an environmental management system, aligned to ISO 14001.

On completion of the course, the successful learner will be able to explain and apply safety, health and environmental requirements in the workplace.

Upon completion of the course, the successful learner will implement the principal requirements of ISO 45001: 2018, the internationally recognised standard for management systems of occupational health and safety.

On completion of this course, the successful learner will be able to conduct an internal audit in accordance with ISO 45001: 2018.

On completion of this course, the successful learner will be able to develop and implement a quality management system (QMS) in accordance with the requirements of ISO 9001: 2015.

On completion of this course, the successful learner will be able to perform internal audits essential for the effective management and improvement of an ISO 9001: 2015 Quality Management System.

This course will provide learners with the requirements of ISO 9001: 2015 and the process module.

The course, divided into six parts, will provide learners with a better understanding of the concept of legal liability and how legislation regulates and enforces it.

The course offers an overview of the Mine Health and Safety Act (MHSA), including the latest amendments and its implications for safety, health and the environment in a mine.

The NEBOSH Certificate in Environmental Management (EC) is a recognised environmental qualification worldwide, which focuses on environmental management systems (ISO 14001), impact assessments, energy efficiency, pollution and environmental emergencies. The syllabus includes UK, EU and international references.

The NEBOSH International Construction Certificate (ICC) course provides employees in the construction industry with essential knowledge to enable them to take an active role in the management of health and safety in their workplace and the best way to integrate risk management into daily operations, as well as monitor this effectively. It covers key construction issues in more technical detail.

The NEBOSH International General Certificate (IGC) in Occupational Health and Safety is a recognised health and safety qualification worldwide, which focuses on international health and safety standards and priorities, and best-practice controlling hazards. It offers an excellent fundamental grounding in the essentials of health and safety.

This course will provide the successful learner with an overview of the NOSA Integrated Five Star System, and guidelines that will enhance effective implementation and maintenance of system standards.

On completion of the course, the successful learner will be able to explain the requirements for conducting a preliminary investigation, gather information for the preliminary investigation, as well as perform post-investigation activities.

AARTO workshops are designed to impart the knowledge of what AARTO is and how it works to all people in your company who hold driving licenses and these workshops deal with a lot more than just AARTO. They also deal with other issues relating to traffic law and driver behaviour and aim to impart a greater understanding of both, a person’s rights and responsibilities as a holder of a driving licence.

The flagship course in occupational health and safety management, SAMTRAC provides the learner with the technical knowledge of concepts, issues, procedures and techniques relating to HSE. This technical knowledge enables the learner to apply the core concepts of risk management and inform policy decision and strategic decision-making processes about the importance of risk management in any sector.

Upon completion of the course, the learner will have a better understanding of the functions and responsibility of an HSE Representative. The learner will be able to carry out basic inspections and participate in HSE committee procedures.

On completion of the course, the successful learner will be able to identify, evaluate and record safety, health and environmental hazards in their designated work areas, and be able to evaluate the risks attached to operational tasks and processes.